Resin is a common textile for large and pocket-size statues. It is easy to bandage and durable enough to employ for outdoor ornaments. Unfortunately, accidents happen and your resin might become croaky, scratched or broken altogether. If this happens, you can employ two methods to repair the statue depending on the extent of the damage. Two-part epoxy glue volition aid you lot repair the statue, but information technology'due south of import to purchase epoxy that is suitable for outdoor utilise if your statue usually sits in your garden.

Put on the dispensable gloves and refer to the epoxy instructions.

Mix the epoxy according to the instructions in the beaker or plastic cup. Use the syringes to accurately measure out the resin and the hardener.

  • Resin is a common fabric for large and small statues.
  • Employ the syringes to accurately mensurate the resin and the hardener.

Stir the epoxy thoroughly using the wooden spatula then apply information technology to the resin statue immediately before it starts to prepare.

Use the spatula to paste over cracks. To stick pieces of the statue back together, apply the epoxy to the statue and stick the cleaved slice back on. Wipe abroad excess epoxy using a dry textile, or wait until the epoxy has dried and utilise a sparse file to remove whatever unsightly excess.

  • Stir the epoxy thoroughly using the wooden spatula then apply information technology to the resin statue immediately earlier it starts to set.
  • To stick pieces of the statue dorsum together, apply the epoxy to the statue and stick the cleaved piece back on.

Agree the piece in identify until the epoxy starts to harden, or apply masking tape to secure the two pieces together. Refer to the manufacturer'south instructions to find out how long this volition accept.

Adhere a drill head to the drill that matches the size of your threaded pipe. Drill a hole in the center of the broken area on both the statue and the broken function, ensuring the holes match up so the part won't sit at an odd bending when you reattach information technology.

Adhere a smaller drill head to your drill and create smaller holes effectually the centre pigsty on the main statue and the cleaved part. Drill the holes in different directions, as this volition assistance the epoxy stick.

Cut the right length of threaded pipage to fit in the two centre holes. You desire the length of the pipage to exist smaller than the two drilled holes, simply it should extend out of the statue and be able to support the broken piece.

Mix the epoxy according to instructions. Use it to both the statue and the broken role, ensuring that the epoxy fills the smaller drilled holes. Printing the ii parts firmly together and refer to the epoxy manufacturer's instructions for advice on the drying time.

  • Attach a smaller drill head to your drill and create smaller holes around the heart hole on the main statue and the cleaved part.
  • Press the two parts firmly together and refer to the epoxy manufacturer's instructions for advice on the drying time.

Remove excess epoxy using a slice of sandpaper or a file in one case it has hardened. If you need to repaint the expanse to match the rest of the statue, you lot tin can do so once the resin has set up fully.

Utilise epoxy mucilage in a well-ventilated area.